Showing posts with label robot. Show all posts
Showing posts with label robot. Show all posts

Sunday, December 23, 2018

A Convergence of Technologies Will Create a New Age of Space Exploration


Small satellites.


A convergence of AI, micro-miniaturization, 3D printing, relatively inexpensive space launches, and thruster-on-a-chip technology will herald a new age of space exploration by corporations and governments alike. 

Think about all the things your smart phone can do. Now imagine a smart phone without a screen. All those thousands of emails are not clogging the system. The dozens of apps are gone, including the ones you actually use. Instead, there is a resident AI that sifts through all the sensors and comms, constantly evaluating status of the mission; whether to shut down and coast, make course corrections, or send in a status report to a remote user interface.  It is the captain of a twenty pound drone headed to an asteroid to check it out for precious metals, water, and other valuables. 



Micro-electro-mechanical system (MEMS) sensors and manipulators will augment the electronic circuits and software on this drone. MEMS gyroscopes and accelerometers power tiny GPS systems for cars and missiles. MEMS piezoelectronics allow inkjet printers to work properly. MEMS microphones populate mobile phones and autos. Silicon MEMS pressure sensors tell us the pressure in our tires and our bodies. There are tiny fluid pumps, ultrasound transducers, and scanners. Soon, all of these devices will become nano-electro-mechanical systems (NEMS), much smaller and requiring less energy. These devices will be incorporated into this new wave of robotic space drones along with new applications such as drilling into asteroids, ore assayer, and atmospheric analyzers. 


MEMS rheostat, about 500 microns in diameter.


Rocket Lab is turning satellite launching on its head by making smaller rockets that can launch more often and cheaper. It uses 3D printing to print out its rocket motors. It can print out one every 24 hours. It uses composite materials and electric fuel pumps to make the Electron rocket lean and efficient. The goal is to launch a 150 - 225 kg payload into space weekly. Soon, it will be carrying small, autonomous space vehicles to explore for asteroid treasure and do scientific surveys of planets and moons.


Electron rocket from Rocket Lab.


Once in orbit, these autonomous drones will need motive power to accomplish their missions, and this is where Accion Systems’ thruster-on-a-chip technology takes over. This is a new type of ion energy drive using an electrospray process to accelerate ions out of a specialized computer chip, creating thrust. It will do this as long as it has the ionic liquid propellant it needs; a non-toxic, non-flammable salt solution. It currently has a thrust density of 0.4 Newtons per meter squared with a theoretical limit of 10,000 Newtons per meter squared. 


Thruster chip from Accion Systems. 



With eight planets, 172 moons, a 150 million asteroids in the asteroid belt, 100 million icy objects in the Kuiper Belt, and an estimated one to ten trillion objects in the Oort Cloud, there are a lot of things in our Solar System to be investigated. Many of these things will have to wait on a small, long-lasting nuclear power systems to get to them, but nuclear fusion is only 30 years away (as it has been for the last 70 years). 

Asteroid mining will become to corporations what the California and Klondike gold rushes were to individuals. Dire news about peak this and peak that competing with stories of weather gone crazy and new warm temperature records every day will be further goads to looking off planet for energy and material resources. Some corporation will soon realize that a new gold rush is upon us. 



That corporation, which may currently be someone sitting around reading an online article right now, will begin making robot drones like Apple makes iPhones. You can buy a basic drone and then get accessories like location beacons to leave on asteroids, software to make a run at skimming the atmosphere of some large moon, storage for the return of ore samples, a small shielded capsule for Earth re-entry, or any number of useful and expensive iterations. 

It’s not something that can be done on the back of a napkin - maybe lots of napkins - but, given the progression of technology, major parts of it could be off-the-shelf. Currently, the largest piece of the puzzle is the AI software to carry out the mission from Earth orbit to, say, the asteroid Ryugu, take samples, and make it back.

The target product is a 20 pound drone that can go 50 million miles somewhere in space, do a survey, and come back. The Electron rocket is ready to take five at a time every week to their rendezvous with destiny. Need a napkin?

Other articles you may enjoy:



The Space Habitat Revisited and Revised


























Tuesday, June 4, 2013

The Future's So Bright, I Got To Wear 3D Printed Shades

A revolution will soon be upon us. Guns and bombs won't be used--at first.

It is sneaking up on us. It's not quite here, yet all the basic elements exist. With a little tweaking and some advances here and there, the technology will be in place. I would say less than ten years and, perhaps, much sooner than that. Events are accelerating, artificially compressing time. Let's face it - shit happens faster now.


Paper or plastic? The correct answer is clear now. 



There is a segment of society that will benefit more than other segments, and it does not necessarily involve the wealthy. The creative, adventurous elements of our society will be driving this change; and there are two technological fronts precipitating this revolution--robotics and 3D printing. Using these two things, an individual can make products of his imagination real. The 3D printer will be his parts source and the robot will be his assembly line.

Courtesy of Steve Jurvetson. Some rights reserved.
Baxter the Robot

The robot that can do it, Baxter, is already on the market. You can teach it yourself by showing it what to do, and it won't accidentally kill you. The catch is the price tag, about $25,000.00. Half or less for a used model. The 3D printer has a ways to go, too. Speed has to go up, cost has to come down from the multi-thousand dollar range.  Printing in metal (yes, it can be done) also has to step in with a consumer product, but the technology exists. When the price of these machines reaches a point at which the average individual might say, "Hey, I can buy one of those!" then Katy bar the door. The combination of the do-anything robot and 3D printer will be a volatile mixture that creates a blast of grass roots creativity and manufacturing. You'll have mom & pop businesses selling customized one-offs, competing with companies in big boy pants. After the initial investment, it will allow creative individuals to pump out a different product a week for the cost of some plastic and electricity and design time.


MakerBot II


In the old days, if you had an idea for a product, it would involve several plastic molds at $10,000 apiece. A minimum production run of several thousand pieces and a patent to protect it. A hundred thousand to a quarter million dollars might be involved to find out if a product is a winner.

Actual 3D printed 3D glasses

You now have the option of protecting your idea for a year with a U.S. provisional patent for $130; long enough to find out if you need to spend more if it's a hit. Let's say your product is plastic. Your used Baxter robot ($10,000) assembles and packs for you while your 3D printer ($500-$1500) pumps out parts. You're a manufacturer for less than the price of a used car. If there's only a few parts, fire the robot and assemble it yourself. Now you're a manufacturer for less than the price of a really nice refrigerator.


The definitive answer to “paper or plastic?” is here! 




Now back to the guns and bombs. China's business model could be doomed, as well as every other country's business model dependent on low wage workers to pump the treadles of their engines of wealth. Free societies with large middle class and good education systems will benefit the most. How this will change the world order, who knows. But it could eventually involve conflict as segments of society employed by large corporations are laid off because of the competition of millions of mini-manufacturing facilities all over the world. These worker's economic status will be endangered, and there could be some ill will involved on their part.

What would you make if you had a 3D printer and a robot to put together the parts?

I don't know about you, but I would seriously think about making 3D printers and robots.

Thanks,

Glen Hendrix
author Transmat World