Showing posts with label future technology. Show all posts
Showing posts with label future technology. Show all posts

Monday, March 4, 2019

What Will the Post Fusion World Look Like?



Photo by Drew McKechnie on Unsplash


Fusion energy technology may happen very soon now - possibly a decade or two. The advantages are an abundant fuel source that will last a million years, no CO2 emissions, very efficient (4 million times that of burning coal), no long term radiation risk, and no chance of a meltdown. We would hope it is cheaper. That will be determined by how much the plants cost and their lifespan and maintenance.

Let’s assume the promise of cheap energy is true, and it is equably distributed. What will it mean to our society? Let’s look back at the last occurrence of cheap energy available to the world in abundance. This was when oil was being discovered all over the world. It gushed from the ground in such quantity, it was arbitrarily assigned an initial value of $2 per barrel. It spurred the development of the internal combustion engine to power cars, trains, ships, and planes. That, in turn, created our modern world and advanced our standard of living by leaps and bounds. 

So, would cheap electrical energy simply replace all combustion engine power with electric motors? No. It would not. For cars and planes and ships, there would have to be batteries involved. We are already seeing rare earth elements and other material for battery production become a bottleneck in the supply chain, and we haven’t even begun to switch over to electric. 

Unless there is a major breakthrough in battery technology, we will go to a hydrogen economy. The cheap electricity will be used in hydrolysis to separate hydrogen and oxygen. There are two ways hydrogen can then be used. 

1. We will burn the hydrogen in combustion engines. The products of that production are water and trace amounts of nitrogen oxides. Even with major breakthroughs in battery technology, hydrogen might be cheaper because it involves only high-pressure tanks. These can be made from carbon fiber and hold thousands of pounds of pressure safely. 

2. The other option is to run the hydrogen through a fuel cell. This generates electricity that turns the motor. It is more efficient than a combustion engine running hydrogen, but it generates a lot of heat and is heavy. These last two qualifiers may prevent the use in airplanes, one of our worst CO2 producers. 

Whichever way we decide to use the cheap electricity produced by nuclear fusion, it will be a big plus for the world economy, not to mention the environment. Production costs will go down so that wages will go further. Quality of life will rise. Sunshine, lollipops, and rainbows everywhere! Okay, maybe not that great. Clean drinking water and a calamity free food supply for eight billion will be the next hurdles. Let’s hope someone has a tech trick up their sleeve for those as well. 



Other articles you may enjoy:

Mining That First Asteroid - Manned Mission or AI?

A Convergence of Technologies Will Create a New Age of Space Exploration


The Space Habitat Revisited and Revised

























Friday, October 26, 2018

Why It Is a Certainty We Will Become a Space-Based Civilization


Courtesy NASA



Technology and science are advancing - new drugs, genetics, self-driving cars and air taxis, and 3D printing of metals and organs. What we don’t give enough thought to is the rate of this advancement. Knowledge and its application are growing not arithmetically, not geometrically, but exponentially. Just to be clear about what that means here are some examples.

Arithmetic: adding a number to itself sequentially, 2+2+2+2 = 8.

Geometric: multiplying a number by itself sequentially, 2x2x2x2 = 16.

Exponential: squaring a number sequentially; 2, 2 squared = 4, 4 squared = 16, 16 squared = 256.

And when AI reaches singularity, all bets are off as to the rate of technical advancement. The people in the know, the computer scientists and inventors close to this subject say the singularity is going to happen. Once AI reaches the equivalence of a human in intelligence, the graph for intelligence from that point on the chart literally points straight up. Within weeks, perhaps days, maybe even hours of reaching the intelligence of a human, AI could be a million times smarter than humans. These are the same people that said satellites will ring the globe, the internet is going to be a big thing, computers will be hand-held, and gravity waves and climate change are real. 

Courtesy Tim Urban & Wait But Why. 


When this happens, will it be like the genie from Arabian Nights or the ultimate worse nightmare the human race has ever seen? Will it be the warm fuzzies or that cold, scaly feeling? I’m going for warm fuzzies. Why the optimism? I’m probably just a dumb fuck, but what better way of staving off boredom for a super-intelligence than by adopting seven billion troglodytes a million times dumber than you with social skills on the level of tribalism just to keep them from wiping themselves out. Besides, we’re quite dexterous and easily trained. Just kidding. 

Courtesy Tim Urban & Wait But Why. 


On the flip side, this could be what happened to other civilizations. This is why there is no one else out there in the galaxy. They did not fall into the same combustion trap we did where the burning of fossil fuels blindsided us with its insidious carbon dioxide creep. No, their machines simply hit the singularity, and that’s it. No more civilization. In that case, where are the high IQ monsters that did them in? Skipping through time to sample past and future civilizations? Perhaps, when they hit a certain level of intelligence, they ascend to a higher plane, hopefully to reflect on the demise of their builders in never-ending remorse. Probably not.

Getting back to the optimistic view, what the singularity means is that every science-fiction-like thing you’ve ever read about could become true. Nuclear fusion; living in good health for centuries; space elevators on Earth, Moon, and Mars; cure for cancer; perfected nanotechnology, force fields, energy shields; weather on demand; artificial food indistinguishable from the real; maybe even teleportation, FTL drives, time travel, and the keys to neighboring dimensions could all become a reality. 

But when? When will AI, generalized AI, not narrow AI (chess playing, car driving), be equal to the human mind? About 25 years.

Barring an errant asteroid or super volcano eruption, soon after that the planet will be bursting at the seams with people. Arcologies five miles high covering 10,000 square miles and holding a billion people will not be enough. The unlimited room, material, and energy of space will siphon humanity from a crowded Earth to the Moon, Mars, the asteroids, the moons of Jupiter, and fabricated habitats of enormous size and beauty. In the blink of a cosmic eye, mankind will become a spacefaring race running loose in the Milky Way Galaxy, albeit with an AI guidance counselor. 


Courtesy NASA

What can you do to plan for this? The main thing would be to make sure you make it to the big event, assuming you’re in the positive outcome camp. Floss, exercise, eat right, don’t smoke. Also, you should probably cozy up to someone working in AI. Keep an ear to the ground, so to speak, to keep tabs on progress. When it happens, be first in line for the longevity drugs, and you’re off to see the history of the rest of the universe … in person. 

Other articles you may enjoy:
























Thursday, September 6, 2018

What Will Be the Most Common Currency In a Future Space-Based Society?


Courtesy NASA

Gold coins? Platinum pellets? Grains of cobalt? I predict water will be the preferred currency in outer space. You can drink it, bathe in it, breathe it (oxygen), burn it in rocket engines (oxygen and hydrogen), grow things (hydroponics), and protect yourself from radiation. 

Water is easily stored, shaped, and divided up for transactions. It can be flash frozen and quickly thawed with the deep cold of space and the intense radiation of the Sun.


Paper bags take 5 X the water to make and 7 X the fuel to transport than plastic bags 


The current method of water storage in space looks like duffel bags with a spout as this picture reveals. This astronaut is obviously reveling in the fortune of water surrounding him. That water is worth $83,400 per gallon based on the current cost of $10,000 to put a pound of something into orbit. Hopefully, it is Evian or Fuji.


Water storage aboard ISS - Courtesy NASA

Or one could build a palace of ice in outer space. There is that much water available on some asteroids. Just make sure the seal between the ice and the airlock stays frozen solid. 

Small entrepreneurs will make their first fortunes by seeking out chunks of ice in the asteroid belt or simply mining close-flying asteroids for the liquid gold. Planetary Resources, an actual asteroid mining company, has recently stated that it will concentrate on water instead of precious metals as its first acquisition. 

Water globule floating on ISS - courtesy NASA


The companies that first acquire water in space will be like the merchants that made fortunes selling picks and shovels to the forty-niners in the California gold rush. 

The importance and value of water will demand that water recycling and reclamation units aboard space vehicles and habitats be ubiquitous and efficient. Even if someone dies in space, the water in their body will be reclaimed before burial in space or transportation back to Earth. This will be part of a signed agreement when someone goes to work in space. Their immediate kin will get some portion of the value of that water in space, even if they are on Earth. 


Saving the world one bag at a time. Recycling genius.  


Security will be a concern as well. When a worker’s contract ends, what’s to keep him from filling flexible bags of water and hiding them about his body and carry-all? When he gets back to the orbiting end of the Lunar Space Elevator or a space station near Earth, he turns his water in for some Earth-based currency like gold or platinum before going back to the planet. 

The biggest non-recoverable expenditure of water in space will be for rocket fuel. The biggest recoverable use for water in space will likely be radiation shielding. It is efficient over a spectrum of radiation including cosmic and gamma rays. In fact, radiation shielding may be designed to not only protect against radiation but to be a reserve source of fuel as well. 

It is possible a water-based currency, both physical and digital, will be established in a space-based culture of dozens of companies and thousands of workers. Since water melts so readily, the gold coins, platinum pellets, or grains of cobalt mentioned before might actually be used; and they will represent some predetermined amount of water. That amount will most likely be decided by some committee with all of the space-based companies represented. The value of water will fluctuate as discoveries are made on asteroids being mined and unrecoverable expenditures of water such as rocket fuel are used up. There may one day be a cryptocurrency based on water - H20coin, of course. 

The actual water will be kept in some safe place, a giant chunk of ice hidden, or well-guarded, or both. As a matter of course, owners of large quantities of water in space will, at some point, have that water melted and mixed with some small amount of radioactive isotope to “brand” it. It won't be enough to affect health, but it will be easy to track if it is stolen. 

There is probably more water in asteroids than on Earth. Its value in space comes from the difficulty and expense of finding and securing it. Those who do this first will be the future lords and princes of outer space. They will control the lifeblood of space.

Other articles you may enjoy:






















Tuesday, September 4, 2018

Workers In Space Will Live In Igloos


Courtesy Kordite at flickr



The mining of asteroids will begin in earnest within the next 10 to 100 years. The asteroids chosen for retrieval and processing will almost certainly contain water because water will be one of the most valuable commodities in space, if not the most valuable. Not only does water contain hydrogen and oxygen for rocket fuel, humans need it for survival; and it is very efficient at stopping many types of radiation. 

If a current or future corporation is going to make a decision on which asteroid to go after, the metal content of the asteroid may not be the deciding factor. Asteroids with little or no water will be passed up for mining at least in the early phase of the industry. If our civilization remains technically and economically viable into the 22nd century, the asteroid mining industry should be hitting its stride and keeping economic growth positive for several hundred years. Even after this maturation, the industry will favor those space rocks containing water simply out of habit and tradition unless some special material is needed that can’t be found in combination with water. Another outlier would be a leap in engine technology, such as a compact fusion drive, that would mediate the reliance on water as stored rocket fuel.


Use those plastic grocery bags again. Save money. Save the world. Here’s how. 


Let’s say some future company is evaluating two different asteroids for mining. One, 1999 JM8, is a nickel, cobalt, and iron asteroid worth $45 trillion dollars. It is fairly large at 4.35 miles in diameter, but only .024 Astronomical Units away at its closest approach to Earth, approximately 2.2 million miles or about ten times the distance from the Earth to the Moon.

Another asteroid, 1950 KA, is worth only $33.4 trillion dollars and is .097 AU at its closest pass to Earth, nearly four times that of 1999 JM8. It has a couple of things going for it, though. It is only 2.17 miles in diameter and has a composition of nickel, iron, cobalt, water, nitrogen, hydrogen, and ammonia. 

This company will pick 1950 KA because of the water, hands down. Once the robotic retrieval craft gets to 1950 KA, it can mine water; and, with the abundant solar energy available in space, split it into hydrogen and oxygen for rocket fuel to move that mass back to Earth.

Courtesy NASA


After 1950 KA is parked in orbit near Earth in one of the Lagrange points L4 or L5, the real fun begins. Using many specially designed, semi-autonomous robots, the asteroid is scraped, tunneled, bored, melted, smelted, hammered, drilled and crushed to extract its treasures. In the early going of asteroid mining, however, it will not be done without humans. We will be there to direct the overall strategy and change tactics when necessary, not to mention repairs and hands-on inspections. This is only because artificial intelligence will not yet be up to the autonomous decision making required of mining asteroids. 


Plastic grocery bags prefer this as their second career. 


Human workers need a safe, even comfortable place to stay while performing these chores. Safe by logical necessity and comfortable to attract the type of person needed for this work given how long they will have to be in space. Money can only go so far as an incentive. Intelligent, athletic, engineering and scientific types only need apply, similar to astronauts in education and ability. 

Here is where the water comes in. These people will be shielded from radiation by a wall of water, actually ice. As I mentioned above, water is very efficient at shielding many types of radiation, including that from solar flares, gamma radiation, and cosmic radiation. Although NASA has been working on a lightweight polyethylene plastic called RFX1, it has some serious problems in competing with water. One, you can’t drink it. Two, it has to be hauled up the gravity well of Earth. 

Exactly how will water be used as a radiation shield? Three feet of water or ice will intercept and diffuse almost any radiation, including gamma rays and cosmic rays. Since there is plenty of water available from the asteroid, it makes sense to protect the entire facility instead of providing a vault or other safe area that people have to go to. At some point, an unexpected sleet of radiation is bound to sweep through the area. This way everyone will be protected all the time unless they are doing something outside of the habitat and not working inside the asteroid.

The geometry of the habitat will resemble a thick hockey puck. This will rotate to provide simulated gravity to the inhabitants. On the unit shown in the drawings, eight rotations per minuted will provide nearly one g at the outer wall or "lower" level. The second level will provide three quarter g, and the "upper" level one half g. The center on one side will have a docking facility. The center of the other side will sprout a boom about as long as twice the diameter of the pancake. At the end of this boom will be thrusters that can point in almost any direction. These thrusters will be powered by, you guessed it, electrolysed water in the form of hydrogen and oxygen burning to form, once again, water.

CLICK TO ENLARGE


Not only is it a habitat, but it can move around as required to view different parts of the asteroid or move equipment that is not self-motile. It will pick up and drop off people at the orbital end of the Lunar Space Elevator. It will be a habitat, taxi, and tug. Some may call it the "Ice Palace", but it’s a given the majority will nickname it the "Igloo."

CLICK TO ENLARGE


This three foot barrier of water will remain frozen because space is cold. Solar energy hitting the outside envelope of the vessel may have some effect, but as that surface rotates into shadow, it will become frozen again. The inside surface of the ice barrier will be in a constant state of melting. The human habitation will necessarily give off heat. No matter how thick the insulation, it will eventually melt this inner surface. This water, through centripetal forces will be routed to the outer surface where it will be refrozen. This ice barrier is a good buffer between the 70-75 degrees Fahrenheit in the habitat and the minus 450 degrees F. of outer space and will probably vary in temperature, getting colder from the inner to outer surfaces.

The lure of infinite wealth and energy will be too strong for capital to resist. A lot of money will be spent on this endeavor. Hopefully, it will be spent wisely, and progress will be swift and beneficial not only for those companies involved but for the rest of us as well. The bottleneck is the gravity well barrier that is currently so expensive to vault. Space is kind of like Vegas; what happens there stays there. However, companies like Obayashi Corporation are working on building an elevator to space. This would drastically reduce the cost of sending stuff into orbit and bringing it back. Their plan is to have it built by 2050, waiting only for the successful mass production of carbon nanotube fibers long enough to use. Hopefully, their prediction will not become similar to the refrain of nuclear fusion developers of having a practical fusion generator within thirty years … every year. While the industry can have some success with rockets, it will grow by leaps and bounds with a working space elevator.

Other articles you may enjoy:






















Monday, August 6, 2018

How We Will Get Asteroid Material Back To Earth




Tesla Roadster in space - courtesy wikipedia







We won't be hauling it down with a Tesla Roadster.


An asteroid one kilometer in diameter is parked at the Lagrange point L5 of the Earth/Moon gravitational system. The asteroid orbits the Earth at the same distance as the Moon - 238,900 miles. If a line were drawing through the center of the Earth to the Moon and the center of Earth to the asteroid there would be about a 45 degree angle between those lines. It is in a safe, stable orbit that does not require regular expenditures of fuel to keep it there. This safe, stable location was the deal between the United Nations and the company retrieving the giant space rock; actually more metal than rock. 16217 Ryugu contains iron, nickel, cobalt, water, nitrogen, hydrogen, and ammonia. 


Plastic bags are made from ethane, a part of natural gas burned as waste before they started making plastic bags. 



Outer space construction has not yet hit its stride so some cheap way is needed to get these metals to the surface of Earth where they can be sold. Here is how it could be done. 

If chunks of metal were cut off of Ryugu and simply dropped to Earth, it would be a mess. Chunks big enough not to vaporize completely upon reentry could do major damage. The velocity when it reached Earth would be nearly 200,000 miles per hour and create an explosion equivalent to 100,000 tons of TNT. So, for practicality, we need to get this stuff closer to Earth and reduce that velocity. 


Flaming mass making reentry - courtesy Neil Bleving




A deal is brokered between the powers that be on Earth and the asteroid mining company so that a million ton chunk of iron can be brought into a medium Earth orbit about 2,000 miles up with careful planning and monitoring. Along with it comes several space tugs and lots of water (from the asteroid) as fuel (electrolysis - oxygen, hydrogen) to keep it in orbit. Engines are anchored to the big asteroid chunk and will automatically kick in to prevent a deterioration in orbit. 

Any amount of heat one requires in outer space is available. One simply needs the right size mirror configured to apply that heat to an appropriately sized area on command. With this heat the stoney portions of an asteroid and, perhaps, lunar regolith can be melted and turned into ceramic. Metals can be melted down by these same mirrors. 

Concentrating mirrors cut off a 300 ton chunk of iron and begin to melt it down. 

Concurrently, stoney portions of the asteroid are melted to form ceramic. While the ceramic is molten, pre-heated (to prevent explosive expansion) nitrogen is introduced into the ceramic melt to produce a foamed ceramic material. This material will be formed into the shape of a lifting body similar to that of the Space Shuttle but about half the size.  As the hot nitrogen entrained in the ceramic cools it forms a partial vacuum, making the material much less conductive to heat. 


It takes 7 trucks to move the same number of paper bags as one truck moving plastic bags. 



The blob of iron melt is rammed into the ceramic mold. High temperature spargers inserted through the wall of the mold inject the iron with nitrogen as well, making a foamed metal having one tenth the weight of iron while still retaining much of its strength.

Once out of the mold, a foamed-ceramic mat is attached to the bottom of the foamed metal lifting body. and a steering module is inserted into the cavity molded in the rear to accept it. This is a heat-resistant rudder and elevators on vertical and horizontal stabilizers controlled by an onboard GPS and autopilot. Built in space with only the electronics and motor coming from Earth, those parts are used again while the rest is recycled. 

A railgun is built on the mass of the asteroid chunk and points at a tangent point to Earth about 100 miles above the surface. The lifting body is attached through grooves molded into it and launched towards Earth at 20,000 miles per hour retrograde to orbital velocity. When the lifting body reaches the upper atmosphere, it is going much slower in relation to the Earth, allowing a safe, guided landing on a shallow lake where it is recovered. 

The bubbled metal might be worth many times its solid value, making the whole operation profitable. Many types of metallurgy may be possible in a vacuum and weightlessness that aren’t feasible on Earth. We could be talking about metals such as high temperature inconels that are very expensive. I designed a coil in a furnace, the prototype for making BPA free plastic bottles, where a 6 inch schedule 40 (1/4” thick wall) piece of pipe cost $1200 per linear foot. 

For smaller packages of very valuable metals like platinum or palladium, NASA may have just the thing. They have developed a folding heat shield. A small reentry vessel with a hundred pounds of palladium has a heat shield that folds out to a much larger size than the vessel itself, creating a shield off of which most of the frictional heat is sloughed away around the side of the vessel on its reentry path to an elevation and speed at which it can deploy a parachute. Be there to pick it up before someone else gets it because that's 1.6 million dollars we're talking about. 



courtesy NASA


These are the possibilities once we start thinking about how to maximize the payback for such a massive undertaking as capturing an asteroid. Of course, the real payoff for the asteroid miner will be when construction off world begins, increasing the value of their asteroid many times. Unexpected returns will be the technological advances necessary to get this done that will eventually work their way into our everyday lives. 

Other articles you may enjoy:
























Wednesday, August 1, 2018

Very Large Scale 3D Printing In Space


Bryan Versteeg / Spacehabs.com



In 2011 German designer Markus Kayser built a machine called a Solar Sinter. It concentrates sunlight via a 3 foot by 5 foot fresnel lens onto a box containing sand. The box moves a layer of sand in programmed patterns, allowing the 1600 degree Celsius beam to melt the sand in a controlled design. Once that pattern, or layer, is complete, another layer of sand is added and the process is repeated until a 3D object is created from fused sand.

A very similar machine could 3D print objects in orbit around the Earth or Moon or anywhere in space sufficient sunlight can be collected to melt stuff. It would have to be highly modified over Mr. Kayser’s design. For one thing, you don’t have the convenience of gravity holding down your bed of sand. Another thing … you don’t have sand. 

Plastic grocery bags prefer this as their second career. 


The fresnel lens will have to be replaced with mirrors simply because mirrors are cheaper, more rugged, and more flexible. The bed of the printer will have to be inside a centrifuge affair producing artificial gravity. Envision a large cylinder 80 feet in diameter and 300 feet long. It spins around its long axis. The printer head can travel the length of the cylinder or in a circular path inside the cylinder, or a flat path on a chord of some arc of the cylinder that is still far enough from the central axis of the cylinder to have enough “gravity” for the system to work. Flexible light pipes will take the sunlight collected by the mirrors at the center of one end of the cylinder and feed it to the printer head. A lens at the printer head will further control the acuity of the beam that hits the medium to be melted. 

Ideally, the centrifuge portion would be attached to an asteroid placed in orbit at one of the Lagrange points L4 or L5 in the Earth-Moon gravity system. That would simplify spinning it without the worry of compensating for precession like a top or anything else that spins. It would be attached to the relatively massive asteroid with brackets that extend to the ends of the cylinder where bearings and electric motors provide smooth, stable rotation with a minimum of fuss and bother. The asteroid is acting like a good work bench, providing stabilizing mass to carry out projects in space. 

If a suitable mass isn't available, the cylinder would simply be set spinning by tangential thrusters with any precession also controlled by swiveling thrusters at each end of the cylinder. 



Centrifugal 3D printer attached to asteroid. Drawing by Glen Hendrix.
Click to Enlarge




If we’re not talking about sand as a printing medium, what are we talking about? There are really only two practical sources for meltable medium to be used in our 3D printer. One is lunar regolith and the other is ground up asteroid. The asteroid option is cheaper if you discount the getting it there part. Lunar regolith would have to be transported from the Moon’s surface. Asteroid material is already in orbit. So far, two good reasons asteroid mining will complement our travel to space and our ability to stay there for any length of time. 

Use those plastic grocery bags again. Save money. Save the world. Here’s how. 


The disadvantages of using asteroid material are that it has to be excavated from the asteroid, sorted by material, and milled into a powder. This will call for the invention of robotic excavators that drill into the asteroid much as tunnel borers do their job on Earth. One of the first jobs to be done in mining an asteroid will be to make safe, comfortable housing for personnel during the project. The asteroid excavator can hollow out tunnels which will be outfitted for habitation safe from any stray cosmic rays. 

Asteroid mining - courtesy NASA


The Moon’s regolith, on the other hand, is already a fine powder. So fine, it was a problem on the lunar landing missions. It is also fairly uniform in composition. Although it would have to be transported from the surface of the Moon, the one sixth Earth gravity should make that a cheaper solution than bringing material from Earth, especially if water can be found on the Moon in sufficient quantity for use as fuel. A lot of regolith can be hauled into orbit for the cost of moving an asteroid. 


3D printed Lunar base - courtesy European Space Agency


Let’s say we use another, more traditional method of 3D printing whereby a small, sticky glob of substance is deposited out of a nozzle and the nozzle moves on. Mixing our asteroid or lunar powder with water and some other adhering substance to hold everything together gives us a paste to use similar to what concrete printers use now, perhaps thicker to cut down on explosive evaporation of the paste as it comes out of the printer nozzle.

Imagine a large steel plate as the print bed. It could be a light gauge steel sheet with stiffeners on the bottom. Without gravity and its attendant forces, the print bed is just a place holder and starting point. The printing side is coated with Teflon for easy removal of the printed object. The edges of the plate are rounded to fit pulleys. Four pulleys with bearings, two on each side of the print bed and aligned with each other, roll continuously along the edges of the printer bed in the plus or minus “x” direction. From the centers of these pulleys extend upwards four shafts in the “y” axis direction. These shafts go through a stabilizer frame that holds everything together. This whole stabilizer frame moves in the plus or minus “y” direction. Mounted through this stabilizer frame is another shaft with the printer head and motor to drive that head in the plus or minus “z” direction.  A large tank for mixing, storage, and pumping floats around, making sure there is no binding or interference with the umbilical delivering print medium to the printer head. 

Free-floating 3D printer. Printing volume about 300' x 60' x 15'. Drawing by Glen Hendrix
Click to Enlarge.


This type of printer might be good for producing parts for habitats in orbit or insulating cladding for equipment or personnel tunnels in an asteroid. The cold of space will seep into the deepest parts of an asteroid and must be dealt with. 

Whether we bring an asteroid into Earth’s orbit or not, I predict 3D printing of large objects in space will become a reality. It may or may not look and work like what I’ve described here, but they will be an integral part of a robotic fabrication milieu in outer space. Human workers will be at a premium. Machines will have to fill the gap.